Home > Buffer I > Buffer I O Error On Device Hda1 Logical

Buffer I O Error On Device Hda1 Logical


linux mem=128M (if you have 128 mbram, otherwise replace the number accordingly) good luck :)/> Mageia 1 0 Back to top MultiQuote Reply Forum Home Announcements |-- Announcements and Board Info can I get something like this?http://www.amazon.com/Sandisk-512MB-Compact-Flash-SDCFJ-512/dp/B001LGAKTS/ref=pd_sim_e_3I guess the other big questions are: is there a guide for doing the re-install of CUE and CME after a bad compact flash card occurs? I read the similar post, however  I'm not given any prompts to make a selection. --------------------Buffer I/O error on device hda1, logical block 81934Processing manifests . How to approach? navigate to this website

I had the same issue until I burned another ISO image. Enter cue-installer.2.0.1 for the default helper image. I agree that it might be the cds for the 10.1 model but on the 10.2 cds (that work on 2/3 computers) do you think it's a hardware problem (I think Solution is quite simple just disable driver for floppy and reboot the system. https://supportforums.cisco.com/discussion/11528866/buffer-io-error-device-hda1-logical-block-81934

Buffer I O Error On Device Logical Block

I’ve CentOS 5 server running on Dell hardware. I checked whether hda3 was mounted (using the "mount" command). Hot Network Questions Is there a single word for people who inhabit rural areas? Do you have any recommendations for software?

it`s called regression and that always happens. Like Show 0 Likes (0) Actions 6. Please visit this page to clear all LQ-related cookies. Buffer I O Error On Device Sda Logical Block Join our community today!

Convince people not to share their password with trusted others Rejected by one team, hired by another. Here's a snippet (too long to post; ask me for the full file if interested): Code: ... [ 0.199720] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.199811] pnp: Any ideas? imp source that is a RAID 5 that dont report any problem ...

You can verify this with the following command (this solution works with RHEL, CentOS, Redhat, Ubuntu/Debian and other Linux distros) : # lsmod | grep -i floppy Output:floppy 95465 0Open file Buffer I O Error On Device Sdb1 Logical Block Updating to the newest kernel has no effect. Can someone provide some advice on what I should do in order to remedy this and fix the voicemail? Also, sometimes disconnecting the CDROM drive can fix strange errors.

Buffer I O Error On Device Sdb Logical Block

I'm just interested in some details, not finger pointing. http://www.cyberciti.biz/faq/linux-end_request-ioerror-dev-fd0-sector0/ You can check for a problem with something like: e2fsck -fv /dev/sdX If you see reallocated sectors within smart you should change the drive in my opinion. Buffer I O Error On Device Logical Block I wonder if anybody knows how serious are these issues. Buffer I O Error On Device Sr0 Logical Block Turns out RIP will not boot on this hardware, as the computer is a small VIA (two CPU instructions were not supported :-P ).

Do you want to help us debug the posting issues ? < is the place to report it, thanks ! http://entrelinks.com/buffer-i/buffer-i-o-error-on-device-dm-1-logical.php For details and our forum data attribution, retention and privacy policy, see here CentOS The Community ENTerprise Operating System Skip to content Search Advanced search Quick links Unanswered posts Active topics Reply Link Xosupher Anderson July 12, 2015, 5:52 pmThis method works however the correct path of the modprobe file is /etc/modprobe.d/blacklist.conf sudo su nano /etc/modprobe.d/blacklist.conf blacklist floppy reboot Reply Link Security: Unit square inside triangle. Buffer I O Error On Device Sdc1 Logical Block

Error processing file exceptions.IOError [Errno 5] Input/output error. . . . . . It contains a lot of system utilities (parted, partimage, fstools, ...) and basic tools (editors, midnight commander, network tools).' + 'Online-Manual Just a few tools from Tools, Recovery, Diagnostic, Emergency section I wonder what these accesses to non-existant devices (sdd, sde, ...) mean.After booting, these errors continue with device names constantly increasing (..., sdj, sdk, ... ).[http://opcenter.de/tmp/vmbreezy_boot2.gif] Output of dmesg is http://entrelinks.com/buffer-i/buffer-i-o-error-on-device-hda1.php UBCD Ultimate Boot CD allows users to run floppy-based diagnostic tools from most CDROM drives on Intel-compatible machines, no operating system required.

Re: Buffer I/O error on device sdx (vmware Server, Linux guest, Windows XP host) the_mip Oct 5, 2007 4:52 AM (in response to xtremenw) Guest Linux distribution is basically Ubuntu 6.10.[http://opcenter.de/tmp/vmbreezy_boot.gif] Buffer I O Error On Device Sdb Logical Block 0 I first tried rebooting the machine, hoping it would boot without mounting /home after pressing Control-D when offered the option of a recovery console. I amwriting to you because I don't know if the problem goes away by wiping and repartitioning the disk, or whether the hard drive is broken, and I am hoping you

You can upload the file using "copy log" command/bin/startup.sh: line 262: /usr/bin/atr_buf_save: Input/output errorWaiting 9 ...Buffer I/O error on device hda1, logical block 172794INIT: Sending processes the TERM signalINIT: cannot execute

Like Show 0 Likes (0) Actions Go to original post Actions Remove from profile Feature on your profile More Like This Retrieving data ... I bet the drive is failing, if this happened all of a sudden and without you doing anything inside the case. These Aren't Roasted! Buffer I O Error On Device Sdc Logical Block 0 Note that the /dev/sda-z form is deprecated starting with the Linux 2.6 kernel series and may not be supported by the Linux kernel in the near future.

In your  case, since the UC500 won't even boot, your best option is to:1)  Format it using FAT in Windows, and move the IOS image plus the default  configuration to the I then downloaded RIP ("recovery is possible") in hopes that the utilities there (testdisk in particular) would help me recover the partition. So the kernel you are running should not have that issue (but update to the current anyway).The buffer I/O errors may be hardware related. get redirected here I suspect, however, that alot of files will be corrupted, and since the file system is busted, it will be a lot of work to recover the files.

we can`t get into the details because we don`t have the sourcecode ! However, are these logs shown on the hypervisor console? Therefore, I scan my logs for that now. Cheers, Willard.

vBulletin 2000 - 2016, Jelsoft Enterprises Ltd. Code: dd if=/dev/hda3 of=/root/sambamount/home.dd The command finished "successfully", but only copied 1GB of the 239GB partition, after emitting a list of buffer I/O errors. Thanks Top ccpatras Posts: 1 Joined: 2011/06/13 21:37:59 Re: Buffer I/O error on Centos 5.2 under vmware ESX Quote Postby ccpatras » 2011/06/13 22:02:04 What was resolution for this. Ensure that the default boot is always disk, the default boot loader is always primary, and the Ethernet interface is always set to internal.    ServicesEngine boot-loader>config     IP Address [] >   

The installer craps out with a "No common CD-ROM drive was detected" error -- funny this is I'm using an ISO ! Last Jump to page: Results 1 to 10 of 48 Thread: Buffer I/O error on device sr0, logical block Thread Tools Show Printable Version Subscribe to this Thread… Display Linear Mode